CoBo-Stack-News No. 3
Dear CoBo-Stack Friends,
Almost exactly one year ago we presented the CoBo-Stack for the first time at the Baumann Open House. We have received a lot of positive feedback and have been able to sell several CoBo-Stacks since the market launch. That makes us very proud. But these successes would not be possible without you and the trust you have placed in us. Therefore we would like to take this opportunity to thank you very much.
Nevertheless, we have not rested over the past twelve months, but have constantly worked on the further development of the CoBo-Stack. You are one of the first to be informed about the latest updates in today's newsletter.
We wish you interesting reading.
Please stay healthy.
Your MBO-CoBo-Stack Team.
The CoBo-Stack celebrates – and you get the presents
We are all suffering from the effects of the Corona pandemic. Therefore, we would like to take the first birthday of our CoBo-Stack as an occasion and give you a little present. All customers who have already invested in a CoBo-Stack will receive a six-month warranty extension free of charge. You do not need to do anything else for this. Within the next few days we will send you a confirmation of the extension by mail. You will also benefit from a new investment. If you purchase a CoBo-Stack until 30 September 2020, we will also extend the warranty period by half a year.
Software update „slowmode“
With the new slow mode setting, paper stacks are handled more sensitively than ever before when lifted.
Hardware upgrade „Gripper“
A total of three grippers are now available for the CoBo-Stack. This makes you more flexible than ever before.
- Gripper S: product height 210mm–340mm (8”–13 3/8”), product width 95mm–160mm (3 ¾”–6 ¼”)
- Gripper M: product height 210mm–340mm (8”–13 3/8”), product width 155mm–235mm (6”–9 ¼”)
- Gripper L: product height 210mm–340mm (8”–13 3/8”), product width 180mm–260mm (7” –10 ¼”)
The three grippers can move products with a width of 95 to 260 mm (3 ¾”–10 ¼”).
Hardware Upgrade „Camera“
Up to now, the CoBo-Stack has always stacked in a fixed alternation for double stream production (A/B production): first on the left pallet, then on the right pallet, then again on the left, etc. But what happens when the operator takes a sample stack for quality control? Then the left-right principle no longer works. This problem is now a thing of the past. By integrating a camera, the CoBo-Stack can now "see" what is printed on the paper stack. As a result, the CoBo-Stack can decide independently whether the stack belongs to production A and must be placed on the left pallet or whether it belongs to production B (right pallet).
The new camera "sees" whether a stack of paper belongs to production A or B.
Did you know?
The CoBo-Stack is available with an automatic height adjustment, which makes it possible to stack pallets up to 1.4m (55”) high. This allows you to use your storage space efficiently.
Your feedback is important to us
If you have questions about the CoBo-Stack, please send an email to firstname.lastname@example.org. We will be happy to help you. If you have any comments regarding the newsletter, please contact our marketing department: email@example.com, phone +49 7191 46-380.